Go Foil Complete (Plate mount) - GL 210 with 17" Flip Tip Tail Wing
This Foil combinations is great for Surf and SUP Performance Foiling.
Slower initial take off lift allows for greater ease of transition from board to foil on bigger days and the extra Speed generated by this foil combination makes pumping a breeze with increased turning and maneouvrability.
Recommended for Surf Prone Boards at between 60 and 85 Litres and SUPs from 100 to 180 Litres
Part of the new High-Aspect GL series, the GL210 is part of the "built for speed" range. You can expect twice the speed range of your typical GoFoil wings. These are a flat design, so all the lift is projected straight upwards and it also provides a skatey style turn with insane pumping performance and glide.
GL210 front wing Dimensions:
Wing Chord: 7.5”/190 mm
Projected area cm sq: 1493
Part of the new High-Aspect GL series, the GL140 is part of the "built for speed" range. You can expect twice the speed range of your typical GoFoil wings. These are a flat design, so all the lift is projected straight upwards and it also provides a skatey style turn with insane pumping performance and glide.
These wings feature the new 1.5 series construction with shiny finish for lighter weight and more streamlined glide. This new series is compatible with all Gofoil Mast/Fuselages and should not require much fitment like A-la-carte wings had in the past.
The 17.5 Flip Tip is the most stable of the 3 in the Flip Tip range, used for maximised manoeuvrability whilst still allowing hold throughout turns. Most popular with SUP, downwinding, windwinging.
100% pre-preg carbon fiber laid up in a solid monolithic structure, cured to 250° F in an autoclave at very high pressure.
Cone system attachment allows the rider to have a stable reliable connection between fuselage and wing.
32.5" Plate Mast
We prioritize performance over convenience, so we chose to mold the mast and fuselage in one-piece.
The advantages of one-piece construction are increased stiffness, superior strength, no weak points of connections and extreme reduction of reliance of metal parts.
Built with 100% pre-preg carbon fiber.
Pre-preg is when carbon fiber is directly impregnated with epoxy resin, resulting in a perfect ratio for the highest quality process.
We believe in simple and strong.
All hardware is provided with each mast.
- 4 washers-must be used to honor warranty
- 4 M8x1.25x30mm stainless steel bolts
- 4 mast track t bolts
We add the following screws to the above assembly set to connect the adapter to the tuttle head mast
- 2 M6x1x60mm flathead stainless steel screws
New logo & high gloss finish.
Mast Thickness: 12 mm
Chord Length: 120 mm
Suits all wings
The plate gives you the advantage of being able to slide the mast roughly three inches forward or backwards to get optimum balance for the rider. Also used for thinner surfboards that do not have the allowance for the tuttle box.
Mast / Fuselage Construction:
- 100% pre-preg carbon fiber laid up in a solid monolithic structure cured to 250° F in an autoclave at very high pressure
- All the areas of the mast are integrally connected in the layup process to allow us to make the thinnest, lowest drag mast possible